不銹鋼埡口套是否需要木工打底主要取決于具體的安裝場景和需求。

　　Whether the stainless steel pass sleeve requires a wooden base mainly depends on the specific installation scenario and requirements.

　　一般情況下不需要木工打底

　　Generally, there is no need for carpenters to provide a base layer

　　不銹鋼埡口套主要用于美化墻角線條和保護墻面，通常不需要木工打底。如果墻體表面平整，沒有明顯的凹凸不平，可以直接安裝不銹鋼埡口套。

　　Stainless steel mouth covers are mainly used to beautify wall corners and protect walls, and usually do not require woodworking as a base. If the surface of the wall is flat and there are no obvious unevenness, stainless steel mouth covers can be directly installed.

　　在某些情況下需要木工打底

　　In some cases, woodworking is required as a base layer

　　墻體表面不平整：如果墻體表面有明顯的破損或不平整，需要進行修補或處理后再安裝不銹鋼埡口套。

　　Uneven wall surface: If there is obvious damage or unevenness on the wall surface, it needs to be repaired or treated before installing the stainless steel sleeve.

　　特殊安裝需求：在某些需要連接或固定的場合下，可能需要進行木工打底處理，以確保安裝的牢固性和美觀性。

　　Special installation requirements: In certain situations where connection or fixation is required, woodworking primer treatment may be necessary to ensure the firmness and aesthetics of the installation.

　　木工打底的具體步驟和注意事項

　　Specific steps and precautions for woodworking base

　　木工找平：無論門洞口是拆了門的還是毛坯的，都需要讓木工進行找平打底。這不僅僅是直接貼一層木板，而是要進行找平處理。

　　Carpenter leveling: Regardless of whether the door opening is dismantled or unfinished, the carpenter needs to level and base it. This is not just about sticking a layer of wooden board directly, but also about leveling it.

　　量尺定制：找到當?shù)氐牟讳P鋼加工店或者網上聯系商家，確定好顏色和尺寸后，商家會安排人過來量尺或提供實際安裝尺寸。

　　Customization of measuring tape: Find a local stainless steel processing shop or contact the merchant online to determine the color and size. After that, the merchant will arrange for someone to measure the tape or provide the actual installation size.

　　安裝過程：如果包安裝的話，需要支付安裝費。通常使用結構膠粘貼，并用木條支撐直到膠水干透。

　　Installation process: If the package is installed, an installation fee needs to be paid. Usually, structural adhesive is used for bonding, and wooden strips are used to support until the adhesive dries completely.

　　注意事項：洞口較大時，要確認電梯能否上樓，不行的話需要從樓梯搬運。安裝時要確保垂直度和水平度，避免安裝后發現不直。

　　Attention: When the opening is large, it is necessary to confirm whether the elevator can go upstairs. If not, it needs to be transported by stairs. During installation, ensure verticality and levelness to avoid discovering unevenness after installation.

　　本文由棗莊不銹鋼啞口套提供幫助，更多的相關內容請點擊：http://jv888.cn希望本文能夠為您帶來幫助，感謝您的閱讀！

　　This article is assisted by Zaozhuang Stainless Steel Mute Cover. For more related content, please click: http://jv888.cn I hope this article can be helpful to you. Thank you for reading!